MetPak™ II Weather Station with Remote Wind Sensor
MetPak II Remote is a compact and lightweight multi-sensor instrument that measures a wide range of weather parameters, with a remote WindSonic wind sensor
for measurement of wind up to 10 metres away from the MetPak II Hub.
The WindSonic wind speed and direction sensor is suitable for mounting on a 10m mast, with the main MetPak II Hub fitted at a height of between 1.25m and 2m (10m cable supplied). This configuration meets
the requirements of the World Meteorological Organization (Guide to Meteorological Instruments and Methods of Observation).
MetPak II remote features a barometric pressure sensor housed in a vented enclosure, and Rotronic Hygroclip HC2-S3 temperature/humidity probe housed in a naturally aspirated radiation shield. The main
MetPak II unit features a rugged U-bolt mounting clamp, suitable for attachment to a vertical pipe up to 50mm diameter.
Features
Remote Wind Speed and Direction Measurement (sensor suitable for installation up to 10m away from main unit)
Air Temperature Measurement
Relative Humidity Measurement
Barometric Pressure Measurement
Dew Point Calculation
Compact, lightweight design
Rugged U-bolt mount suitable for installation on a vertical pipe
Specifications
Parameters - Met
Wind Speed & Direction, Temperature, Humidity, Barometric Pressure, Dew Point
Wind Speed Range
0-60m/s (134 mph)
Wind Direction Range
0-359º - No dead band
Air Temperature Range
-35ºC to +70ºC
Relative Humidity Range
0 to 100% RH
Barometric Pressure Range
600 to 1100 hPa
Dew Point Resolution
0.1ºC (0.1ºF)
Digital Output
RS232, RS422, RS485* or SDI-12 (user selectable)
MetPak II Remote is a compact and lightweight multi-sensor instrument that measures a wide range of weather parameters, with a remote WindSonic wind sensor
for measurement of wind up to 10 metres away from the MetPak II Hub.
The WindSonic wind speed and direction sensor is suitable for mounting on a 10m mast, with the main MetPak II Hub fitted at a height of between 1.25m and 2m (10m cable supplied). This configuration meets
the requirements of the World Meteorological Organization (Guide to Meteorological Instruments and Methods of Observation).
MetPak II remote features a barometric pressure sensor housed in a vented enclosure, and Rotronic Hygroclip HC2-S3 temperature/humidity probe housed in a naturally aspirated radiation shield. The main
MetPak II unit features a rugged U-bolt mounting clamp, suitable for attachment to a vertical pipe up to 50mm diameter.